WiFi Connection/pt - Revision history

Otman at 12:20, 22 May 2025

2025-05-22T12:20:02Z

← Older revision		Revision as of 14:20, 22 May 2025
Line 55:		Line 55:

	Na próxima vez que o ARIS for iniciado, ele será executado na URL da rede HotSpot. Portanto, você pode digitar a URL (192.168.5.1:3000 no exemplo) em um navegador deste ou de qualquer outro dispositivo conectado ao HotSpot e acessar o ARIS simultaneamente.		Na próxima vez que o ARIS for iniciado, ele será executado na URL da rede HotSpot. Portanto, você pode digitar a URL (192.168.5.1:3000 no exemplo) em um navegador deste ou de qualquer outro dispositivo conectado ao HotSpot e acessar o ARIS simultaneamente.
	[[~~Arquivo~~:Urlhp.png\|300px\|~~polegar~~\|~~direita~~\|URL da rede ARIS no HotSpot]]		[[File:Urlhp.png\|300px\|thumb\|right\|URL da rede ARIS no HotSpot]]
	Observe que, para este tipo de rede, existe a opção de definir um nome de servidor personalizado em vez do endereço IP numérico, facilitando o acesso ao sistema pelo navegador. Os passos para configurar este recurso são explicados em detalhes abaixo.		Observe que, para este tipo de rede, existe a opção de definir um nome de servidor personalizado em vez do endereço IP numérico, facilitando o acesso ao sistema pelo navegador. Os passos para configurar este recurso são explicados em detalhes abaixo.

Otman at 12:17, 22 May 2025

2025-05-22T12:17:50Z

← Older revision		Revision as of 14:17, 22 May 2025
Line 34:		Line 34:

	Agora, na próxima vez que o ARIS for iniciado, ele será executado no URL desejado.		Agora, na próxima vez que o ARIS for iniciado, ele será executado no URL desejado.
	[[File:Url.png\|300px\|~~polegar~~\|~~direita~~\|ARIS na URL ~~da rede~~]]		[[File:Url.png\|300px\|thumb\|right\|ARIS on network URL]]
	Portanto, você pode digitar a URL (192.168.1.111:3000 no exemplo) em um navegador deste ou de qualquer outro dispositivo conectado à mesma rede e acessar o ARIS simultaneamente. Neste exemplo, a rede selecionada para executar o ARIS foi "MiFibra-842E" (WiFi). Assim, todos os dispositivos conectados a esta rede podem acessar o aplicativo como se estivessem no servidor.		Portanto, você pode digitar a URL (192.168.1.111:3000 no exemplo) em um navegador deste ou de qualquer outro dispositivo conectado à mesma rede e acessar o ARIS simultaneamente. Neste exemplo, a rede selecionada para executar o ARIS foi "MiFibra-842E" (WiFi). Assim, todos os dispositivos conectados a esta rede podem acessar o aplicativo como se estivessem no servidor.

Jamba: Created page with "Nos casos em que não há redes Wi-Fi nem Ethernet disponíveis, a inicialização de uma Rede Local (conhecida como HotSpot) a partir do laptop/PC que atua como servidor permite criar um ponto de acesso no qual outros dispositivos podem se conectar e, assim, trabalhar simultaneamente com o ARIS, mesmo sem conexão à internet. Para configurar e executar o ARIS em uma rede HotSpot, você deve fazer o seguinte:"

2025-05-19T23:13:21Z

Created page with "Nos casos em que não há redes Wi-Fi nem Ethernet disponíveis, a inicialização de uma Rede Local (conhecida como HotSpot) a partir do laptop/PC que atua como servidor permite criar um ponto de acesso no qual outros dispositivos podem se conectar e, assim, trabalhar simultaneamente com o ARIS, mesmo sem conexão à internet. Para configurar e executar o ARIS em uma rede HotSpot, você deve fazer o seguinte:"

← Older revision		Revision as of 01:13, 20 May 2025
Line 87:		Line 87:
	Após esses passos, você deve definir o 'ARIS/Frontend/build/server_ip.txt' com o mesmo nome do arquivo hosts, em vez do endereço IP, conforme explicado na seção anterior.[[File:ArisURL.png\|150px\|thumb\|center\|Edição server_ip.txt]]		Após esses passos, você deve definir o 'ARIS/Frontend/build/server_ip.txt' com o mesmo nome do arquivo hosts, em vez do endereço IP, conforme explicado na seção anterior.[[File:ArisURL.png\|150px\|thumb\|center\|Edição server_ip.txt]]

	~~<div lang="en" dir="ltr" class=~~"~~mw-content-ltr~~">		Após iniciar o ARIS, ele estará acessível através da URL "aris", conforme definido anteriormente. Acessá-la no navegador dos dispositivos conectados ao HotSpot fará com que o aplicativo acesse o servidor como se estivesse no próprio servidor. [[File:ArisURL2.png\|300px\|thumb\|right\|URL personalizada do ARIS]]
	~~Once you start ARIS~~, ~~it will be accessible through the “aris” URL as set before~~. ~~Accessing this in the browser of the devices connected to the~~ HotSpot ~~will access the application as in the server itself~~.[[File:ArisURL2.png\|300px\|thumb\|right\|~~Custom~~ ARIS ~~URL~~]]
	~~</div>~~

Jamba: Created page with "Após esses passos, você deve definir o 'ARIS/Frontend/build/server_ip.txt' com o mesmo nome do arquivo hosts, em vez do endereço IP, conforme explicado na seção anterior.Edição server_ip.txt"

2025-05-19T23:12:51Z

Created page with "Após esses passos, você deve definir o 'ARIS/Frontend/build/server_ip.txt' com o mesmo nome do arquivo hosts, em vez do endereço IP, conforme explicado na seção anterior.150px|thumb|center|Edição server_ip.txt"

← Older revision		Revision as of 01:12, 20 May 2025
Line 85:		Line 85:
	##Feche o Bloco de Notas depois de salvar as alterações.		##Feche o Bloco de Notas depois de salvar as alterações.

	~~<div lang="en" dir="ltr" class="mw-content-ltr">~~		Após esses passos, você deve definir o 'ARIS/Frontend/build/server_ip.txt' com o mesmo nome do arquivo hosts, em vez do endereço IP, conforme explicado na seção anterior.[[File:ArisURL.png\|150px\|thumb\|center\|Edição server_ip.txt]]
	~~After these steps~~, ~~you must set the~~ 'ARIS/Frontend/build/server_ip.txt' ~~with the same name as in the~~ hosts ~~file~~, ~~instead of the~~ IP ~~address~~, ~~as explained in the previous section~~.[[File:ArisURL.png\|150px\|thumb\|center\|~~Editing~~ server_ip.txt]]
	~~</div>~~

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	Once you start ARIS, it will be accessible through the “aris” URL as set before. Accessing this in the browser of the devices connected to the HotSpot will access the application as in the server itself.[[File:ArisURL2.png\|300px\|thumb\|right\|Custom ARIS URL]]		Once you start ARIS, it will be accessible through the “aris” URL as set before. Accessing this in the browser of the devices connected to the HotSpot will access the application as in the server itself.[[File:ArisURL2.png\|300px\|thumb\|right\|Custom ARIS URL]]
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2025-05-19T23:12:46Z

Updating to match new version of source page

Show changes

Jamba: Created page with "
TOC
Default ARIS url"

2025-05-19T23:09:56Z

Created page with "<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div> 300px|thumb|right|Default ARIS url"

New page

[[Category:WiFi Connection]]

<languages/>
<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>
[[File:localhost.png|300px|thumb|right|Default ARIS url]]

<div lang="en" dir="ltr" class="mw-content-ltr">
ARIS allows other devices in the same network as the laptop/PC acting as server (i.e., the one where it was installed, and actually running the application) to connect to the system and work concurrently.
However, ARIS executes by default on “localhost” (i.e., the server itself, which is a way to access services or resources on your own machine without going over the network), and thus not allowing other devices to connect (even if they are in the same network).
Hence, this should be properly reconfigured to the right URL (or IP address).
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
To make ARIS available through the WiFi connection, the first thing necessary is actually a WiFi.
Just notice that this is different from having Internet connection, which is not really necessary at this point.
There are actually two cases here.
The first one is when the network already exists, and the second is when the network must be created in the same server in the form of a HotSpot.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==Pre-existing network==
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
In cases where WiFi or Ethernet connections are already available, there is the option to run the system in any of these networks. In order to be able to connect multiple devices on the same network to use ARIS concurrently, you will need to set the IP address as follows:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
# Look for the IP address (the unique number that identifies where the device is located in the network) of the server executing ARIS. Note that this IP address must be the one of the active network where both the server and the other devices MUST connect. To find out which is the IP address of the server, you should:
## Open Settings: Click on the Start menu (Windows icon) located at the bottom-left corner of your screen. Then click on the gear icon labeled "Settings" to open the Windows Settings menu.
## Navigate to Network & Internet Settings: In the Windows Settings menu, click on the "Network & Internet" option. This will take you to settings related to your network connections.
## View Network Status: In the Network & Internet settings, you'll see various options on the left side. Click on "Status". This will show you an overview of your network status.
## Change Adapter Options: Under the "Status" section, find and click on the "Change adapter options" link. This will open a window displaying all the network adapters available on your computer.
## Find Active Network Connection: In the Network Connections window, you'll see a list of network adapters. Identify the available network connection (one from these three in the following example: Ethernet, WiFi or Local Area Connection - a.k.a. HotSpot) where ARIS needs to run. Note that the chosen network MUST be also available for the other devices to connect too (i.e., visible from those devices). Right-click on the active network connection and select "Status" from the context menu (right button in the mause or touch pad).[[File:Netconnections.png|900px|thumb|center|Network Connections example]]
## Check Connection Status: In the Status window for your network connection, click on the "Details" button. This will open a new window displaying detailed information about your network connection.
## Find the IP address: In the Network Connection Details window, look for the "IPv4 Address" field. This field will display your active IP address.[[File:Ncdetails.png|300px|thumb|center|Network Connection details example]]
## Note Down the IP address: Take note of the IP address displayed next to "IPv4 Address." This is the active IP address of your PC in the network.
# Copy this IP address in the 'ARIS\Frontend\build\server_ip.txt' file:
## Navigate to 'C:\Users\Public' folder and find the 'ARIS\Frontend\build\server_ip.txt' file.
## Copy the selected IP address to this file, removing the previous content.[[File:Server_ip_file.png|200px|thumb|center|Editing server_ip.txt]]
## Save the changes and close the file.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Now, the next time ARIS starts, it will run in the desired URL.
[[File:Url.png|300px|thumb|right|ARIS on network URL]]
Hence, you can type the URL (192.168.1.111:3000 in the example) in a browser of this or any other device connected to the same network and access ARIS concurrently. In this example, the selected network to run ARIS was "MiFibra-842E” (WiFi). So all devices connected to this network, can thus access the application as in the server.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==HotSpot network==
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
In cases where neither WiFi nor Ethernet networks are available, the initialization of a Local Area Network (known as HotSpot) from the laptop/PC acting as server allows to create an access point in which other devices can connect and thus work concurrently with ARIS, even without any Internet connection. In order to set up and run ARIS in a HotSpot network, you must do the following:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
#Download and install [https://mypublicwifi.com/publicwifi/en/index.html MyPublicWiFi software], an assistant which will enable the creation of the HotSpot.
#Once successfully installed, open the application. You will see the main configuration page.
#In this page, select “WLAN Hotspot” tab and set the following options:
#:Network Access: Router Mode (NAT)
#:Internet Connection: WiFi (0.0.0.0)
#:Network name (SSID): arisWiFi (can be anything else)
#:Network key: arisnetwork (can be anything else)
#When finished, click the “Start Hotspot” button. In case of success, the IP address in which the HotSpot is running will be shown, alongside with the previously configured name of the network. At this point, nearby devices will be capable of connecting to the “arisWiFi” by selecting this network and introducing the key.[[File:Publicwifirunning.png|300px|thumb|center|Setting the HotSpot configuration.]]
#Find the 'C:\Users\Public folder and open the ARIS\Frontend\build\server_ip.txt' file.
#Copy the IP address where the HotSpot is running (192.168.5.1 in the example) into this file, removing the previous content.[[File:Serverfilehp.png|200px|thumb|center|Editing server_ip.txt]]
#Save the changes and close the file.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The next time ARIS starts, it will run in the HotSpot network URL. Hence, you can type the URL (192.168.5.1:3000 in the example) in a browser of this or any other device connected to the HotSpot and access ARIS concurrently.
[[File:Urlhp.png|300px|thumb|right|ARIS on HotSpot network URL]]
Note that for this type of networks there is the option to set a custom server name instead of the numeric IP address, making it easier to access the system in the browser. The steps to set up this feature are explained in detail below.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
===Setting custom server name in the 'hosts' file===
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Furthermore, '''only for HotSpot connections (in case of WiFi and Ethernet connections the server name cannot be configured this way, but must be done by the network administrator)''', there is the option to set a server name instead of the numeric IP address so it can be easier to remember. For this purpose, we must edit the Windows hosts file:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
#Open Notepad as an Administrator:
##Click on the Start menu (Windows icon) located at the bottom-left corner of your screen.
##Type "Notepad" into the search bar.
##Right-click on Notepad in the search results.
##Select "Run as administrator" from the context menu. If prompted for permission, click "Yes."
#Open the Hosts File:
##In Notepad, click on "File" in the top-left corner.
##Choose "Open."
##In the file explorer window, navigate to the following location: C:\Windows\System32\drivers\etc
##Change the file type dropdown menu to "All Files (*.*)" (in the bottom-right corner of the window) to make sure you can see the hosts file.
##Select the file named "hosts" and click "Open".
#Edit the Hosts File:
##The hosts file will open in Notepad.
##You'll see some comments at the beginning of the file (lines starting with a "#" symbol).
##To add an entry, go to the end of the file on a new line.
##Enter the IP address you want to assign (such as "192.168.5.1") followed by a space and then the servern name you want to map to that IP address. For example: "192.168.5.1 aris" [[File:Hosts_new.png|500px|thumb|center|Editing hosts file]]
#Save the Changes:
##After making your changes, click on "File" in the top-left corner.
##Choose "Save" to save the changes to the hosts file.
#Close Notepad:
##Close Notepad once you've saved the changes.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
After these steps, you must set the 'ARIS/Frontend/build/server_ip.txt' with the same name as in the hosts file, instead of the IP address, as explained in the previous section.[[File:ArisURL.png|150px|thumb|center|Editing server_ip.txt]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Once you start ARIS, it will be accessible through the “aris” URL as set before. Accessing this in the browser of the devices connected to the HotSpot will access the application as in the server itself.[[File:ArisURL2.png|300px|thumb|right|Custom ARIS URL]]
</div>

WiFi Connection/pt - Revision history

Otman at 12:20, 22 May 2025

Otman at 12:17, 22 May 2025

Jamba: Created page with "Após esses passos, você deve definir o 'ARIS/Frontend/build/server_ip.txt' com o mesmo nome do arquivo hosts, em vez do endereço IP, conforme explicado na seção anterior.Edição server_ip.txt"

FuzzyBot: Updating to match new version of source page

Jamba: Created page with "__TOC__ Default ARIS url"

Jamba: Created page with "
TOC
Default ARIS url"