IMAGING - User contributions [en]

MobileApp:Using ARIS Bluetooth functionality

2023-10-25T15:57:16Z

Pau: /* Downloading and analyzing images */

[[Category:MobileApp:Using ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

Before using Bluetooth functionality, it must first be properly [[MobileApp:Configuring ARIS Bluetooth functionality|configured]]. Notice that such configuration must be done in a coordinated way by using both ''System Administrator'' and ''Laboratory Supervisor'' user roles.
<BR/>
<BR/>
<BR/>
<BR/>

== Creating a request with an automatic test ==
[[File:EnablingAutomaticTest.gif|right|none|400px|thumb| Adding an automatic test to a request]]

Once the ''System Administrator'' has enabled the Bluetooth functionality, and the ''Laboratory Supervisor'' has created an automatic kind of test (e.g., for Malaria), the ''Laboratory Technician'' can freely choose this in any request.
Notice that a kind of test being declared to be automatic, just means that this option is enabled.
However, the ''Laboratory Technician'' can still disable it for any concrete request.
If disabled, the test becomes a regular one and its result must be manually provided.

It is important to notice that for the automatic test to work, the corresponding pre-trained neural network should have been made available in the Internet and downloaded in the ARIS instance.

== Downloading and analyzing images ==
[[File:WorklistForBluetooth.png|right|none|400px|thumb| Finding the validation letter]]

The automatic analysis of images by means of artificial intelligence requires the interaction of the Mobile App and ARIS, as shown in the video under these lines.
First of all the mobile and the computer hosting ARIS must have been [[MobileApp:User_Guide|paired]], and ARIS properly [[MobileApp:Configuring ARIS Bluetooth functionality|configured]].
Then, the mobile app should download the worklist from ARIS by clicking the button ''NEW WORKLIST'', and choosing the right Bluetooth device (i.e., DESKTOP-RJEMUQ2 in the video, but this identifier will change from one computer to another).
Notice that this is completely transparent to ARIS graphical interface and its user should not notice that the worklist is being trasferred to the mobile.
Nevertheless, ARIS should still be up and running, and its Bluetooth functionality enabled to be able to send the corresponding information in the background.
In the video, we see that only one test (i.e., 231016R000101) is in the list, but in general, there could be many.

Next step is to use the mobile phone to take the images.
This can be done immediately after downloading a worklist, but also if the worklist was downloaded previously (use the '''SAVED WORKLIST''' button in this case).
In any case, we should choose the test to perform from the available worklist.
As before, in this video, we see only one test, but in general we will see many.
To avoid mistakes, the mobile app will require a control letter to proceed (i.e., "E" in the video).
This letter should have been previously annotated in the slide together with the corresponding request identifier, and can be obtained at anytime from ARIS (see the red circle in the image).

The next screen in the mobile app allows to choose the scanning mode, which is ''MANUAL'' in the case of the video.
Thus, the laboratory technician should focus the image and press the button to take as many pictures as desired.
Alternatively, ''AUTOMATIC'' mode can be chosen (see shorter video), which automatically moves the slide and focuses the microscope.
Notice that the control letter in this case is different, since the test identifier is also another one.

In either one mode or another, during the process, a low quality and quick image analysis is made, whose results are interactively shown in the screen of the mobile.
When satisfied, they should press ''SAVE'' to indicate that the analysis of the current sample is over.
This action will keep all the taken images in the mobile.

[[File:MobileAppInteraction.mp4|650px]]
[[File:Auto_mode.mp4|650px]]

However, in order to perform a more reliable analysis and persist the results, the images should be sent to ARIS by clicking the ''SYNC ARIS'' button in the main screen of the mobile app.
ARIS user will not be interrupted, however, this action can affect performace and generate some interferences in the queries if concurrently working over the same requests.
Thus, the process is appropriately signaled in the top right corner of the ARIS screen.
In the video, only one image is transferred, but in general, many can be downloaded to ARIS at once in the same synchronization process.
Actually all those saved in the mobile app since the last synchronization will be downloaded in a single batch.
Just notice that the more images have to be transferred, the longer the process will take.

During the downloading and analysis, ARIS user can see the status of the process just clicking on the dropdown arrow next to the circling icon.
This will show a list of all downloaded images whose analysis did not finish, yet.
Once the analysis of an image is over, the result of the corresponding test is written to the database.
If the result is positive, an exemplary image is also stored and can be seen in the corresponding ARIS screen by both laboratoty technitians and supervisors.
Since this may generate some space problem in the computer hosting ARIS, an automatic purging mechanism is in place.
The amount of images kept is configured in the corresponding [[ARIS:System administration#Parameters|system parameter]].
When the limit is surpassed, older images are automatically deleted at start up time.

== Manually introducing values in an automatic test ==
[[File:AutomaticWithManualResults.mp4|right|500px]]

Any test that has been defined as automatic can be redefined as not.
Both ''Laboratory Technician'' before introducing results or the ''Laboratory Supervisor'' once introduced, on validating them, can do this.
When the corresponding tick is removed, the test does not accept images anymore, and its results can be introduced manually as for any other test.

MobileApp:Using ARIS Bluetooth functionality

2023-10-25T15:53:37Z

Pau: /* Downloading and analyzing images */

[[Category:MobileApp:Using ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

Before using Bluetooth functionality, it must first be properly [[MobileApp:Configuring ARIS Bluetooth functionality|configured]]. Notice that such configuration must be done in a coordinated way by using both ''System Administrator'' and ''Laboratory Supervisor'' user roles.
<BR/>
<BR/>
<BR/>
<BR/>

== Creating a request with an automatic test ==
[[File:EnablingAutomaticTest.gif|right|none|400px|thumb| Adding an automatic test to a request]]

Once the ''System Administrator'' has enabled the Bluetooth functionality, and the ''Laboratory Supervisor'' has created an automatic kind of test (e.g., for Malaria), the ''Laboratory Technician'' can freely choose this in any request.
Notice that a kind of test being declared to be automatic, just means that this option is enabled.
However, the ''Laboratory Technician'' can still disable it for any concrete request.
If disabled, the test becomes a regular one and its result must be manually provided.

It is important to notice that for the automatic test to work, the corresponding pre-trained neural network should have been made available in the Internet and downloaded in the ARIS instance.

== Downloading and analyzing images ==
[[File:WorklistForBluetooth.png|right|none|400px|thumb| Finding the validation letter]]

The automatic analysis of images by means of artificial intelligence requires the interaction of the Mobile App and ARIS, as shown in the video under these lines.
First of all the mobile and the computer hosting ARIS must have been [[MobileApp:User_Guide|paired]], and ARIS properly [[MobileApp:Configuring ARIS Bluetooth functionality|configured]].
Then, the mobile app should download the worklist from ARIS by clicking the button ''NEW WORKLIST'', and choosing the right Bluetooth device (i.e., DESKTOP-RJEMUQ2 in the video, but this identifier will change from one computer to another).
Notice that this is completely transparent to ARIS graphical interface and its user should not notice that the worklist is being trasferred to the mobile.
Nevertheless, ARIS should still be up and running, and its Bluetooth functionality enabled to be able to send the corresponding information in the background.
In the video, we see that only one test (i.e., 231016R000101) is in the list, but in general, there could be many.

Next step is to use the mobile phone to take the images.
This can be done immediately after downloading a worklist, but also if the worklist that was downloaded previously (use the '''SAVED WORKLIST''' button in this case).
In any case, we should choose the test to perform from the available worklist.
As before, in this video, we see only one test, but in general we will see many.
To avoid mistakes, the mobile app will require a control letter to proceed (i.e., "E" in the video).
This letter should have been previously annotated in the slide together with the corresponding request identifier, and can be obtained at anytime from ARIS (see the red circle in the image).

The next screen in the mobile app allows to choose the scanning mode, which is ''MANUAL'' in the case of the video.
Thus, the laboratory technician should focus the image and press the button to take as many pictures as desired.
Alternatively, ''AUTOMATIC'' mode can be chosen (see shorter video), which automatically moves the slide and focuses the microscope.
Notice that the control letter in this case is different, since the test identifier is also another one.

In either one mode or another, during the process, a low quality and quick image analysis is made, whose results are interactively shown in the screen of the mobile.
When satisfied, they should press ''SAVE'' to indicate that the analysis of the current sample is over.
This action will keep all the taken images in the mobile.

[[File:MobileAppInteraction.mp4|650px]]
[[File:Auto_mode.mp4|650px]]

However, in order to perform a more reliable analysis and persist the results, the images should be sent to ARIS by clicking the ''SYNC ARIS'' button in the main screen of the mobile app.
ARIS user will not be interrupted, however, this action can affect performace and generate some interferences in the queries if concurrently working over the same requests.
Thus, the process is appropriately signaled in the top right corner of the ARIS screen.
In the video, only one image is transferred, but in general, many can be downloaded to ARIS at once in the same synchronization process.
Actually all those saved in the mobile app since the last synchronization will be downloaded in a single batch.
Just notice that the more images have to be transferred, the longer the process will take.

During the downloading and analysis, ARIS user can see the status of the process just clicking on the dropdown arrow next to the circling icon.
This will show a list of all downloaded images whose analysis did not finish, yet.
Once the analysis of an image is over, the result of the corresponding test is written to the database.
If the result is positive, an exemplary image is also stored and can be seen in the corresponding ARIS screen by both laboratoty technitians and supervisors.
Since this may generate some space problem in the computer hosting ARIS, an automatic purging mechanism is in place.
The amount of images kept is configured in the corresponding [[ARIS:System administration#Parameters|system parameter]].
When the limit is surpassed, older images are automatically deleted at start up time.

== Manually introducing values in an automatic test ==
[[File:AutomaticWithManualResults.mp4|right|500px]]

Any test that has been defined as automatic can be redefined as not.
Both ''Laboratory Technician'' before introducing results or the ''Laboratory Supervisor'' once introduced, on validating them, can do this.
When the corresponding tick is removed, the test does not accept images anymore, and its results can be introduced manually as for any other test.

MobileApp:Configuring ARIS Bluetooth functionality

2023-10-25T15:45:06Z

Pau: /* Upgrading the neural network */

[[Category:MobileApp:Configuring ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

ARIS is prepared to be coupled with the Mobile App. However, this feature is initially disabled. Thus, to be able to use it, it first needs to be enabled through the corresponding [[ARIS:System administration#Parameters|system parameter]], and then properly configured.
<BR/>
<BR/>
<BR/>
<BR/>
<BR/>

== Enabling Bluetooth ==
[[File:EnablingBluetooth.mp4|right|500px]]

It is crucial to remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
The one that can use the Bluetooth functionality is the ''Laboratory Technician''.
However, the one that makes it available is the ''System Administrator''.

Thus, just after installing ARIS, the ''Laboratory Technician'' cannot see the Bluetooth icon in the top right corner.
To enable this functionality, the ''System Administrator'' has to log in and navigate to ''Parameters'' tab under ''Technical Configuration''.
The ''bluetooth_enabler'' should be located in the list of parameters.
By clicking on it, we will be able to change its value from ''Disabled'' to ''Enabled''.
Doing this immediately triggers the downloading of the neural network that allows to analyze images.
Notice that an Internet connection should be available to allow it.
The better the connection, the faster it will download.
In a reasonably good Internet connection, it should take approximately one minute.
To avoid hanging forever, a timeout has been set to four minutes.
Take into account that, in case of failure during the downloading process of the neural network, the ''bluetooth_enabler'' parameter will remain ''Disabled''.

After successfully finishing the download, we can log in as ''Laboratory Technician'' to see that the corresponding icon is already visible.

== Configuring an automatic kind of test ==

[[File:DefiningAutomaticKindOfTest.mp4|right|500px]]

Again, we should remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
In this case, the one that indicates that a kind of test is automatic (i.e., is done using the Mobile App) is the ''Laboratory Supervisor''.
However, the one that makes this possible, in the same way as before, is the ''System Administrator''.

Thus, just after installing ARIS, there is not any kind of test which is automatic, and not even the option to indicate it so is available.
The same procedure that enables the Bluetooth (i.e., changing the ''bluetooth_enabler'' system parameter) enables this possibility.
Notice that if the neural network was already downloaded, it will not happen again.

Only after the ''System Administrator'' enables the Bluetooth and the ''Laboratory Supervisor'' has defined a kind of test as automatic, the ''Laboratory Technician'' can create requests for this kind of test.

== Upgrading the neural network ==
[[File:UpdatingNN.PNG|right|600px|thumb|Pop-up window while upgrading neural network]]

The upgrading of the neural network works similar to the [[ARIS:Installation_and_Upgrades#Upgrading_ARIS|upgrading of ARIS]] itself.
Thus, you will only need an Internet connection.
Once you are connected to the Internet, if a new version of the neural network for image recognition is available, the next time that you open the application the upgrading process will automatically start.

MobileApp:Configuring ARIS Bluetooth functionality

2023-10-25T15:40:17Z

Pau: /* Upgrading the neural network */

[[Category:MobileApp:Configuring ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

ARIS is prepared to be coupled with the Mobile App. However, this feature is initially disabled. Thus, to be able to use it, it first needs to be enabled through the corresponding [[ARIS:System administration#Parameters|system parameter]], and then properly configured.
<BR/>
<BR/>
<BR/>
<BR/>
<BR/>

== Enabling Bluetooth ==
[[File:EnablingBluetooth.mp4|right|500px]]

It is crucial to remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
The one that can use the Bluetooth functionality is the ''Laboratory Technician''.
However, the one that makes it available is the ''System Administrator''.

Thus, just after installing ARIS, the ''Laboratory Technician'' cannot see the Bluetooth icon in the top right corner.
To enable this functionality, the ''System Administrator'' has to log in and navigate to ''Parameters'' tab under ''Technical Configuration''.
The ''bluetooth_enabler'' should be located in the list of parameters.
By clicking on it, we will be able to change its value from ''Disabled'' to ''Enabled''.
Doing this immediately triggers the downloading of the neural network that allows to analyze images.
Notice that an Internet connection should be available to allow it.
The better the connection, the faster it will download.
In a reasonably good Internet connection, it should take approximately one minute.
To avoid hanging forever, a timeout has been set to four minutes.
Take into account that, in case of failure during the downloading process of the neural network, the ''bluetooth_enabler'' parameter will remain ''Disabled''.

After successfully finishing the download, we can log in as ''Laboratory Technician'' to see that the corresponding icon is already visible.

== Configuring an automatic kind of test ==

[[File:DefiningAutomaticKindOfTest.mp4|right|500px]]

Again, we should remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
In this case, the one that indicates that a kind of test is automatic (i.e., is done using the Mobile App) is the ''Laboratory Supervisor''.
However, the one that makes this possible, in the same way as before, is the ''System Administrator''.

Thus, just after installing ARIS, there is not any kind of test which is automatic, and not even the option to indicate it so is available.
The same procedure that enables the Bluetooth (i.e., changing the ''bluetooth_enabler'' system parameter) enables this possibility.
Notice that if the neural network was already downloaded, it will not happen again.

Only after the ''System Administrator'' enables the Bluetooth and the ''Laboratory Supervisor'' has defined a kind of test as automatic, the ''Laboratory Technician'' can create requests for this kind of test.

== Upgrading the neural network ==
[[File:UpdatingNN.PNG|right|600px|thumb|Pop-up window while upgrading neural network]]

The upgrading of the neural network works similar to the [[ARIS:Installation_and_Upgrades#Upgrading_ARIS|upgrading of ARIS]] itself.
Thus, you will only need an Internet connection.
Once you are connected to the Internet, if there is a new version of the neural network for image recognition, the next time that you open the application the upgrading process will automatically start.

File:UpdatingNN.PNG

2023-10-25T15:33:01Z

Pau:

MobileApp:Configuring ARIS Bluetooth functionality

2023-10-25T15:31:01Z

Pau: /* Enabling Bluetooth */

[[Category:MobileApp:Configuring ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

ARIS is prepared to be coupled with the Mobile App. However, this feature is initially disabled. Thus, to be able to use it, it first needs to be enabled through the corresponding [[ARIS:System administration#Parameters|system parameter]], and then properly configured.
<BR/>
<BR/>
<BR/>
<BR/>
<BR/>

== Enabling Bluetooth ==
[[File:EnablingBluetooth.mp4|right|500px]]

It is crucial to remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
The one that can use the Bluetooth functionality is the ''Laboratory Technician''.
However, the one that makes it available is the ''System Administrator''.

Thus, just after installing ARIS, the ''Laboratory Technician'' cannot see the Bluetooth icon in the top right corner.
To enable this functionality, the ''System Administrator'' has to log in and navigate to ''Parameters'' tab under ''Technical Configuration''.
The ''bluetooth_enabler'' should be located in the list of parameters.
By clicking on it, we will be able to change its value from ''Disabled'' to ''Enabled''.
Doing this immediately triggers the downloading of the neural network that allows to analyze images.
Notice that an Internet connection should be available to allow it.
The better the connection, the faster it will download.
In a reasonably good Internet connection, it should take approximately one minute.
To avoid hanging forever, a timeout has been set to four minutes.
Take into account that, in case of failure during the downloading process of the neural network, the ''bluetooth_enabler'' parameter will remain ''Disabled''.

After successfully finishing the download, we can log in as ''Laboratory Technician'' to see that the corresponding icon is already visible.

== Configuring an automatic kind of test ==

[[File:DefiningAutomaticKindOfTest.mp4|right|500px]]

Again, we should remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
In this case, the one that indicates that a kind of test is automatic (i.e., is done using the Mobile App) is the ''Laboratory Supervisor''.
However, the one that makes this possible, in the same way as before, is the ''System Administrator''.

Thus, just after installing ARIS, there is not any kind of test which is automatic, and not even the option to indicate it so is available.
The same procedure that enables the Bluetooth (i.e., changing the ''bluetooth_enabler'' system parameter) enables this possibility.
Notice that if the neural network was already downloaded, it will not happen again.

Only after the ''System Administrator'' enables the Bluetooth and the ''Laboratory Supervisor'' has defined a kind of test as automatic, the ''Laboratory Technician'' can create requests for this kind of test.

== Upgrading the neural network ==

The upgrading of the neural network works similar to the [[ARIS:Installation_and_Upgrades#Upgrading_ARIS|upgrading of ARIS]] itself.
Thus, you will only need an Internet connection.
Once you are connected to the Internet, if there is a new version of the neural network for image recognition, the next time that you open the application a pop-up window will appear with three options asking you to update it: '''Update now''', '''No (Defer for 30 days)''', '''Remind me later'''

MobileApp:Configuring ARIS Bluetooth functionality

2023-10-25T15:28:32Z

Pau: /* Enabling Bluetooth */

[[Category:MobileApp:Configuring ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

ARIS is prepared to be coupled with the Mobile App. However, this feature is initially disabled. Thus, to be able to use it, it first needs to be enabled through the corresponding [[ARIS:System administration#Parameters|system parameter]], and then properly configured.
<BR/>
<BR/>
<BR/>
<BR/>
<BR/>

== Enabling Bluetooth ==
[[File:EnablingBluetooth.mp4|right|500px]]

It is crucial to remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
The one that can use the Bluetooth functionality is the ''Laboratory Technician''.
However, the one that makes it available is the ''System Administrator''.

Thus, just after installing ARIS, the ''Laboratory Technician'' cannot see the Bluetooth icon in the top right corner.
To enable this functionality, the ''System Administrator'' has to log in and navigate to ''Parameters'' tab under ''Technical Configuration''.
The ''bluetooth_enabler'' should be located in the list of parameters.
By clicking on it, we will be able to change its value from ''Disabled'' to ''Enabled''.
Doing this immediately triggers the downloading of the neural network that allows to analyze images.
Notice that an Internet connection should be available to allow it.
The better the connection, the faster it will download.
In a reasonably good Internet connection, it should take approximately one minute.
To avoid hanging forever, a timeout has been set to four minutes.
Take into account that, in case of failure during the downloading process of the neural network, the ''bluetooth_enabler'' parameter will remain ''Disabled''.

After finishing the download, we can log in as ''Laboratory Technician'' to see that the corresponding icon is already visible.

== Configuring an automatic kind of test ==

[[File:DefiningAutomaticKindOfTest.mp4|right|500px]]

Again, we should remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
In this case, the one that indicates that a kind of test is automatic (i.e., is done using the Mobile App) is the ''Laboratory Supervisor''.
However, the one that makes this possible, in the same way as before, is the ''System Administrator''.

Thus, just after installing ARIS, there is not any kind of test which is automatic, and not even the option to indicate it so is available.
The same procedure that enables the Bluetooth (i.e., changing the ''bluetooth_enabler'' system parameter) enables this possibility.
Notice that if the neural network was already downloaded, it will not happen again.

Only after the ''System Administrator'' enables the Bluetooth and the ''Laboratory Supervisor'' has defined a kind of test as automatic, the ''Laboratory Technician'' can create requests for this kind of test.

== Upgrading the neural network ==

The upgrading of the neural network works similar to the [[ARIS:Installation_and_Upgrades#Upgrading_ARIS|upgrading of ARIS]] itself.
Thus, you will only need an Internet connection.
Once you are connected to the Internet, if there is a new version of the neural network for image recognition, the next time that you open the application a pop-up window will appear with three options asking you to update it: '''Update now''', '''No (Defer for 30 days)''', '''Remind me later'''

MobileApp:Configuring ARIS Bluetooth functionality

2023-10-25T15:26:13Z

Pau: /* Enabling Bluetooth */

[[Category:MobileApp:Configuring ARIS Bluetooth functionality]]

<div style="float:left; margin: 0px 20px 0px 0px">__TOC__</div>

ARIS is prepared to be coupled with the Mobile App. However, this feature is initially disabled. Thus, to be able to use it, it first needs to be enabled through the corresponding [[ARIS:System administration#Parameters|system parameter]], and then properly configured.
<BR/>
<BR/>
<BR/>
<BR/>
<BR/>

== Enabling Bluetooth ==
[[File:EnablingBluetooth.mp4|right|500px]]

It is crucial to remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
The one that can use the Bluetooth functionality is the ''Laboratory Technician''.
However, the one that makes it available is the ''System Administrator''.

Thus, just after installing ARIS, the ''Laboratory Technician'' cannot see the Bluetooth icon in the top right corner.
To enable this functionality, the ''System Administrator'' has to log in and navigate to ''Parameters'' tab under ''Technical Configuration''.
The ''bluetooth_enabler'' should be located in the list of parameters.
By clicking on it, we will be able to change its value from ''Disabled'' to ''Enabled''.
Doing this immediately triggers the downloading of the neural network that allows to analyze images.
Notice that an Internet connection should be available to allow it.
The better the connection, the faster it will download.
In a reasonably good Internet connection, it should take approximately one minute.
To avoid hanging forever, a timeout has been set to four minutes.
Take into account that, in case the downloading process of the neural network fails, the ''bluetooth_enabler'' parameter will remain''Disabled''.

After finishing the download, we can log in as ''Laboratory Technician'' to see that the corresponding icon is already visible.

== Configuring an automatic kind of test ==

[[File:DefiningAutomaticKindOfTest.mp4|right|500px]]

Again, we should remember that the system has three different [[ARIS:System administration#Roles|roles]] with different and complementary functionalities.
In this case, the one that indicates that a kind of test is automatic (i.e., is done using the Mobile App) is the ''Laboratory Supervisor''.
However, the one that makes this possible, in the same way as before, is the ''System Administrator''.

Thus, just after installing ARIS, there is not any kind of test which is automatic, and not even the option to indicate it so is available.
The same procedure that enables the Bluetooth (i.e., changing the ''bluetooth_enabler'' system parameter) enables this possibility.
Notice that if the neural network was already downloaded, it will not happen again.

Only after the ''System Administrator'' enables the Bluetooth and the ''Laboratory Supervisor'' has defined a kind of test as automatic, the ''Laboratory Technician'' can create requests for this kind of test.

== Upgrading the neural network ==

The upgrading of the neural network works similar to the [[ARIS:Installation_and_Upgrades#Upgrading_ARIS|upgrading of ARIS]] itself.
Thus, you will only need an Internet connection.
Once you are connected to the Internet, if there is a new version of the neural network for image recognition, the next time that you open the application a pop-up window will appear with three options asking you to update it: '''Update now''', '''No (Defer for 30 days)''', '''Remind me later'''

MobileApp:User Guide

2023-05-15T15:05:54Z

Pau: /* ARIS Bluetooth states */

[[Category:MobileApp:User Guide]]

===ARIS Bluetooth states===

<graphviz border='frame' format='svg' caption='ARIS Bluetooth states'>
digraph StatesDiagram {
node [shape=rectangle style=rounded fontsize="9pt"];
edge [fontsize="7pt"];
//----- Main graph
// Nodes
Begin [label="" shape="circle" style=filled fillcolor=black fixedsize=true width=0.2 height=0.2];
Waiting [label="Waiting"];
TransferingWorklist [label="Transfering Worklist"];
ReceivingImages [label="Receiving Images"];
ExecutingModel [label="Executing Model"];
End [label="" shape="doublecircle" style=filled fillcolor="black" fixedsize=true width=0.2 height=0.2];
// Edges
Begin -> Waiting [label="Enable Bluetooth"]; // [constraint=false];
Waiting -> TransferingWorklist [label="Mobile request"];
TransferingWorklist -> Waiting; // [constraint=false];
Waiting -> ReceivingImages [label="Mobile request"];
ReceivingImages -> Waiting; // [constraint=false];
ReceivingImages -> ExecutingModel [label="Last image of a test"];
ExecutingModel -> ReceivingImages; // [constraint=false];
Waiting -> End [label="Disable Bluetooth"]; // [constraint=false];

//{ rank=same; Begin Registered Processing WithResults Validated}
//{ rank=same; Cancelled End}
}
</graphviz>


===Mobile app states===

<graphviz border='frame' format='svg' caption='ARIS Bluetooth states'>
digraph StatesDiagram {
node [shape=rectangle style=rounded fontsize="9pt"];
edge [fontsize="7pt"];
//----- Main graph
// Nodes
Begin [label="" shape="circle" style=filled fillcolor=black fixedsize=true width=0.2 height=0.2];
EWL_EIR [label="Empty Worklist\n Empty Image Repository"];
EWL_FIR [label="Empty Worklist\n Filled Image Repository"];
FWL_EIR [label="Filled Worklist\n Empty Image Repository"];
FWL_FIR [label="Filled Worklist\n Filled Image Repository"];
Scanning [label="Scanning"];
End [label="" shape="doublecircle" style=filled fillcolor="black" fixedsize=true width=0.2 height=0.2];
// Edges
Begin -> EWL_EIR; // [constraint=false];
EWL_EIR -> End;
EWL_FIR -> End;
FWL_EIR -> End;
FWL_FIR -> End;
EWL_EIR -> FWL_EIR [label="Read Worklist"];
EWL_FIR -> FWL_FIR [label="Read Worklist"];
FWL_EIR -> FWL_EIR [label="Read Worklist"];
FWL_FIR -> FWL_FIR [label="Read Worklist"];
FWL_EIR -> Scanning [label="Scan"];
FWL_FIR -> Scanning [label="Scan"];
Scanning -> EWL_FIR [label="Take Last Pictures"]
Scanning -> FWL_FIR [label="Take Pictures"]
FWL_FIR -> EWL_FIR [label="Take Last Picture"]
FWL_FIR -> FWL_FIR [label="Take Picture"]
FWL_EIR -> EWL_FIR [label="Take Last Picture"]
FWL_EIR -> FWL_FIR [label="Take Picture"]
EWL_FIR -> EWL_EIR [label="Upload Images"]
FWL_FIR -> FWL_EIR [label="Upload Images"]
//{ rank=same; Begin Registered Processing WithResults Validated}
//{ rank=same; Cancelled End}
}
</graphviz>

MobileApp:User Guide

2023-05-15T15:04:24Z

Pau: /* ARIS Bluetooth states */

[[Category:MobileApp:User Guide]]

===ARIS Bluetooth states===

<graphviz border='frame' format='svg' caption='ARIS Bluetooth states'>
digraph StatesDiagram {
node [shape=rectangle style=rounded fontsize="9pt"];
edge [fontsize="7pt"];
//----- Main graph
// Nodes
Begin [label="" shape="circle" style=filled fillcolor=black fixedsize=true width=0.2 height=0.2];
Waiting [label="Waiting"];
TransferingWorklist [label="Transfering Worklist"];
ReceivingImages [label="Receiving Images"];
ExecutingModel [label="Executing model"];
End [label="" shape="doublecircle" style=filled fillcolor="black" fixedsize=true width=0.2 height=0.2];
// Edges
Begin -> Waiting [label="Enable Bluetooth"]; // [constraint=false];
Waiting -> TransferingWorklist [label="Mobile request"];
TransferingWorklist -> Waiting; // [constraint=false];
Waiting -> ReceivingImages [label="Mobile request"];
ReceivingImages -> Waiting; // [constraint=false];
ReceivingImages -> ExecutingModel [label="Last image of a test"];
ExecutingModel -> ReceivingImages; // [constraint=false];
Waiting -> End [label="Disable Bluetooth"]; // [constraint=false];

//{ rank=same; Begin Registered Processing WithResults Validated}
//{ rank=same; Cancelled End}
}
</graphviz>


===Mobile app states===

<graphviz border='frame' format='svg' caption='ARIS Bluetooth states'>
digraph StatesDiagram {
node [shape=rectangle style=rounded fontsize="9pt"];
edge [fontsize="7pt"];
//----- Main graph
// Nodes
Begin [label="" shape="circle" style=filled fillcolor=black fixedsize=true width=0.2 height=0.2];
EWL_EIR [label="Empty Worklist\n Empty Image Repository"];
EWL_FIR [label="Empty Worklist\n Filled Image Repository"];
FWL_EIR [label="Filled Worklist\n Empty Image Repository"];
FWL_FIR [label="Filled Worklist\n Filled Image Repository"];
Scanning [label="Scanning"];
End [label="" shape="doublecircle" style=filled fillcolor="black" fixedsize=true width=0.2 height=0.2];
// Edges
Begin -> EWL_EIR; // [constraint=false];
EWL_EIR -> End;
EWL_FIR -> End;
FWL_EIR -> End;
FWL_FIR -> End;
EWL_EIR -> FWL_EIR [label="Read Worklist"];
EWL_FIR -> FWL_FIR [label="Read Worklist"];
FWL_EIR -> FWL_EIR [label="Read Worklist"];
FWL_FIR -> FWL_FIR [label="Read Worklist"];
FWL_EIR -> Scanning [label="Scan"];
FWL_FIR -> Scanning [label="Scan"];
Scanning -> EWL_FIR [label="Take Last Pictures"]
Scanning -> FWL_FIR [label="Take Pictures"]
FWL_FIR -> EWL_FIR [label="Take Last Picture"]
FWL_FIR -> FWL_FIR [label="Take Picture"]
FWL_EIR -> EWL_FIR [label="Take Last Picture"]
FWL_EIR -> FWL_FIR [label="Take Picture"]
EWL_FIR -> EWL_EIR [label="Upload Images"]
FWL_FIR -> FWL_EIR [label="Upload Images"]
//{ rank=same; Begin Registered Processing WithResults Validated}
//{ rank=same; Cancelled End}
}
</graphviz>